How to fix a kenwood radio in protect mode ~ the easy way ~

today we fix kenwood model kdc-4047u usb model .  

i want to share with you this easy methode ,

the simple way to reset the unit without open radio .



Comments

Post a Comment

Popular posts from this blog

PANASONIC PLASMA TV BLINKING CODES

Panasonic Plasma TVs have built-in fault diagnosing circuit.  If any fault occurs with any circuit board inside, the loaded firmware will detect it and will give you its indication in the form or standby light blinks. From the number of blinks at one time, experienced service technicians can detect the faulty section [circuit board], without opening the TV.  This will help technicians to detect and repair faulty section fast. Here are some hints about the number of blinks to Pansonic Plasma TVs. PANSONIC PLASMA TV:  MODEL NO: X24 _ C2 _ U2 _ S2 _ G20 _  G25 _ VT20 & VT25 Switch ON the set by its main power ON/OFF switch at its front panel [not with remote control], and count the number of blinks occur before the set shuts down. 2 Blinks:   15V SOS D_BOARD / P-BOARD. 3 Blinks:   3.3V SOS D BOARD. 4 Blinks:   POWER SOS P-BOARD. 5 Blinks    5V SOS D-BOARD. 6 Blinks    DRIVER SOS 1 SC BOARD OR D-SC FPC...
Read more

How To reset password pioneer AVIC-F980BT

Image
Today we try To reset the radio navigator Pioneer AVIC-F980BT. see the video for more detail. instructions:  Extract Testmode_a.key to an empty, formatted usb (fat32). While the unit is ON, pop in the stick in USB1. The unit will auto reboot, into test mode. Perform Initialize To Factory Defaults. The screen will go blue, then reboot. No more Password. file -testmode.key- : Direct Download
Read more

Security Password Removal Script for Z110/120/130/140, x920/930/940 & similar F series

Image
A simple way to permanently delete your unit's security password. No Condi Hackmode or TestMode needed. I wrote a simple script that will delete the security PASSWORD for most Win CE based F, Z, and X series units. I can't say whether it will work with the very old units, and it won't work with the model numbers ending in 50 or greater,  or Nex units.  Format a smallish SD (32 GB or less) FAT32. Download and Unzip the attached file. Copy into the root of the SD the TestMode.key and ScriptExec.ini from my zip. No other files on the SD. Eject it from your PC and insert into your AVIC. If nothing happens after 5 seconds. turn off your ignition for a few seconds, then turn it on. You should see a prompt to press any key. Press any button (volume-+ or trk <,>). Done. Remove the SD and restart your unit. No more password. Note that the TestMode.KEY included here is only used to run scripts. It will not put your unit into the Maintenance menu. A...
Read more