PHOENIXCARD LATEST VERSION V3.09 Free DOWNLOAD

-
PhoenixCard is software that lets you burn Android firmware on micro SD cards. Phoenix card is free Windows-based software designed to create bootable images and write them to connected removable drives, such as SDCARDs or MicroSD. The removable drive is then placed into the target device and the device is made to boot from the removable drive, applying an update or complete reimage to the target.  It is used especially for Allwinner A10 ARM processors.

Download PhoenixCard v3.09 from Here.

Create installation SD card.
Important: This will erase the SD card

  • Download and unzip the Phoenixcard archive to a folder on your PC. 
  • Unzip the single (image name).img from the downloaded image to an accessible folder on your Windows system.
  • Obtain a micro SD card of at least 1GB in size and connect it to your PC in some fashion. It should be accessible under a drive letter in Windows.
  • Browse to the folder where you unzipped Phoenixcard and find the PhoenixCard.exe file with the green folder icon next to it. Double click to launch. The Phoenix card software will launch.
  • Using the drop-down to the right of Disk select the windows to drive the letter that contains your Micro SD card.
  • Click on the image button and browse to where ever you extracted (image name).img to, and select the file.
  • Ensure Product is selected under Write Mode. Product mode will create a self-booting Micro SD designed to apply a separate image to a device.
  • Click on Burn. Pay attention to the status messages. Once it is complete you can eject the Micro SD from your windows system.

Comments

Post a Comment

Popular posts from this blog

Security Password Removal Script for Z110/120/130/140, x920/930/940 & similar F series

-
Image
A simple way to permanently delete your unit's security password. No Condi Hackmode or TestMode needed. I wrote a simple script that will delete the security PASSWORD for most Win CE based F, Z, and X series units. I can't say whether it will work with the very old units, and it won't work with the model numbers ending in 50 or greater,  or Nex units.  Format a smallish SD (32 GB or less) FAT32. Download and Unzip the attached file. Copy into the root of the SD the TestMode.key and ScriptExec.ini from my zip. No other files on the SD. Eject it from your PC and insert into your AVIC. If nothing happens after 5 seconds. turn off your ignition for a few seconds, then turn it on. You should see a prompt to press any key. Press any button (volume-+ or trk <,>). Done. Remove the SD and restart your unit. No more password. Note that the TestMode.KEY included here is only used to run scripts. It will not put your unit into the Maintenance menu. A...
Read more