Procedure To Desactivate Protection On Some Pwm Inverter Controllers:

-

BD9766VF

LED to pin 20 and GND.


MP1060EF

connect capacitor C117 to pin 3 and GND 



AT1741



OZ960



OZ964

sst = Soft-Start Time




BIT3193



FAN 7311 -7314 in Model BN44-00182 C

Zener 4,3V

Resistor 620 Ohm


MP1008

Resistor= 10 KOhm




OZ9938

Resistor = 10 KOhm




BIT3102




OZ9966SN



INL837GL





BIT3713





BD9766VF




BD9883




BD9886FV 

mounted in  SONY KDL-40S2000

Connect GND to pin 22


MP1009



BA9741



MSC1692

Resistor 220 Ohm connects to pin 4 and GND.

LX1692 mounted in  Sony KDL 40S5600




OZ9970



BD9240

Resistor 10 KOhm to pin 15 (CP) and GND.



INL837



OB3316QP

connect LED to pin 5 and GND.




BI 3101A

Resistor 220 - 470 OHm to GND.



TA9687GN

Resistor  47 KOhm to pin 12 (TIMER) and GND

_________________________________________________________________________________________________________________________________________

OZ9937

Resistor  47 KOhm to pin 14 (TIMER) and GND


OZ9966SN

Resistor 10 KOhm to pin 15 (TIMER) and GND


BD9270F

Resistor 10 KOhm to pin 13 (CP) and GND


OZ9976

Resistor 10 KOhm to pin 11 (TIMER) and GND


OZ972GN mounted in inverter V370H-L01

LED to pin 8 and GND


OZ9643N

Resistor 20 KOhm to pin 1 and GND.


DDA009

connect 3 Volts to pin 18 (V COMP)


OZ5508G / N

connect LED to pin 3 in parallel with the capacitor


BD9275F

A resistor of 1 KOhm to pin 11 (TIMER) and GND



AAT1107 = connect Gnd to pin 15



AAT1100 = connect GND to  pin 8



BD 9777 = connect GND to pin 14



TL5001 = pin 5 to GND



TL1451 = pin 15 to GND



TL5451 = pin 15 to GND



BA9741 = pin 15 to GND



BA9743 = pin 15 to GND



MB3775 = pin 15 to GND



AT1741 = pin 15 to GND



AT1380 = pin 2 to GND



KA7500 = pin 1 and 16 to GND



TL494 = pin 1 and 16 to GND



FA3629 = pin 15 and 16 to GND



FA3630 = pin 7 and 10 to GND



OZ960 - OZ962 = pin 2 to GND



OZ965 = pin 4 and 6 to GND



BIT3101 = disconnect pin 2 and 15



BIT3102 = disconnect pin 5



BIT3105 = disconnect pin 4



BIT3106 = disconnect pin 4 and 27



BIT3107 = disconnect pin 4



BIT3193 = disconnect pin 3 and 15



AAT1100 = pin 8 to GND.



AAT1107 = pin 15 to GND




SEM 2005 Res. of 82 K connect to Pin 1 and GND



BD 9893 F Resistor of 82 K connects to pin 10 and GND.



OZ 9910 Resistor of 82 K connect to pin 6 and GND.



SEM 2006: Pin 5 GND.



MP 3810    resistor 82 K connect to pin 6 and GND.



LM 2901 ( inverter Sharp ) Resistor of 82 K connect to pin 6 and GND.



OZ 9938 GN   connect Pin 3 ( Timer ) to GND   



OZL68GN: jumper pin 4 to pin 7. 

Comments

Post a Comment

Popular posts from this blog

Security Password Removal Script for Z110/120/130/140, x920/930/940 & similar F series

-
Image
A simple way to permanently delete your unit's security password. No Condi Hackmode or TestMode needed. I wrote a simple script that will delete the security PASSWORD for most Win CE based F, Z, and X series units. I can't say whether it will work with the very old units, and it won't work with the model numbers ending in 50 or greater,  or Nex units.  Format a smallish SD (32 GB or less) FAT32. Download and Unzip the attached file. Copy into the root of the SD the TestMode.key and ScriptExec.ini from my zip. No other files on the SD. Eject it from your PC and insert into your AVIC. If nothing happens after 5 seconds. turn off your ignition for a few seconds, then turn it on. You should see a prompt to press any key. Press any button (volume-+ or trk <,>). Done. Remove the SD and restart your unit. No more password. Note that the TestMode.KEY included here is only used to run scripts. It will not put your unit into the Maintenance menu. A...
Read more